EMMECI products

Electronic products designed and realized by Emmeci Elettronica

    Drivers for electromechanic and electropneumatic actuators

    Drivers are devices that improve the performance of electromechanic and electropneumatic actuators (electromagnets, electrovalves, clutch/brake groups, etc.) by reducing their activation time.

    Interfaces for sensors and actuators

    In this page, there are many boards able to make conversions between electric signals of various nature, like encoders, speedometer dinamos, etc.

    There are also many kinds of galvanic insulators to interface operating systems with different voltages and actuators to connect PCs to our boards.

    Multifunction interface for encoders

    Line-driver converter ⇒ Push-pull

    Frequency-Voltage and Current-Voltage programmable converter

    Opto-isolator for digital signals

    SSR solid state relay) for DC and AC

    Boards to process analog and digital dignals fast

     USB-RS232 and USB-RS485 converters*

    *  Devices not created by our company, but they have been selcted because they are adequate to be paired with our devices

    Sensors for special jobs

    Emmeci Elettronica makes various types of sensors for special jobs, usually used in the hot-melt sector, but also relevant for other jobs.

    LEVEL-CAP: level sensor for high temperatures with ON/OFF and analog outputs

    W-CHECKER: presence and width control sensor for hot-melt

    adhesive lines / machine phases controllers

    The adhesive lines programmers are phase machine controllers that have been purpose-built to solve piloting problems related to adhesive supply guns, both hot (hot-melt) and cold (cold-glue) and offer a validand high performing alternative to controllers of electronic and PLC cams

    Adhesive lines/machine phases controllers

    COMPACT-PLUS: adhesive line controller

    MESSIER/MC42: Fluid supply system

    MC-TRM06: 22 keys programmation terminal with alphanumeric display

    Granular adhesive charger

    The granular adhesive charger Easy-charge produced by Emmeci Elettronica fills the tanks of hot-gluing systems (hot-melt) completely automatically.

    Compared to other chargers offers benefits in terms of transfer efficiency, the maximum distance the adhesive can travel, superable height difference and types of operable adhesives.

    Through the optional device DL-SMART, EASY-CHARGE is able to give precise info about the quantity of adhesive transferred to the tanks connected to it and diagnostics even on remote, typical of the 4.0 industry