FLJ57 | Emmeci Elettronica – Design and manufacture of electronic boards and systems

FLJ57 - Fluids transfer system

Drivers


General features

FLJ57 - FLJ57

The fluids transfer system FLJ57 is designed to be used in all applications where fluid pumping at medium/low flow rates is required.

It is supplied complete with stainless steel support so that it can be installed quite quickly.

  • Dimensions: 300 x 340 x 150 (lenght x width x height) mm
  • Flow rate: 26 liters/min
  • Air supply pressure: 1 / 6.5 bar

When compared with other fluid transfer systems, such as piston pumps, the FLJ57 system offers many advantages:

  • High reliability thanks to the use of a maintenance-free double diaphragm pump.
  • Ease of use and maintenance (the system is easy to clean thanks to the inspectable filter).
  • Low cost (the diaphragm pump used is maintenance-free and particularly economic).
  • Simple installation for start-up (the system just requires the application of pneumatic line pressure and the insertion of the priming pipe in the tank).

F.A.Q.

What is cold glue?

The cold glue, also called cold glue, is a type of liquid adhesive, generally opaque white color, which is formed by an adhesive part dissolved in water. It can be used for bonding almost all the materials (paper, cardboard, certain types of plastics, wood and derivatives, metals, for building material, etc.) With the exception of those non-stick (eg. PTFE / Teflon and siliconised surfaces) and dirty or greasy surfaces. It is also not suitable for paste 2 both impermeable surfaces, given that bonding occurs only when the water present in the adhesive is completely evaporated, operation impossible if the materials to be bonded are non-absorbent.
The cold glue is known in civil field as glue and can be used in a limited number of bondings.
For the industry there are several families and numerous types of cold glue, suitable for uses of each type and with various levels of viscosity and setting time.

The cold bonding is permanent?

After evaporation of the aqueous part of the adhesive bonding is permanent and irreversible. In critical applications, it is possible to combine a cold bonding with glue to one with hot glue. (See related FAQ).

I have to glue different materials. Can I use a single type of cold glue?

Each type of cold glue has fields of use different sipendenti both by its features, both from the time that the adhesive employs before pasting the 2 parts (based on the amount of water and adhesive characteristics have setting times and different bonding characteristics).

Where should I use cold glue? What are the advantages compared to other adhesive?

The cold glue can be used in all applications where it is necessary a permanent and irreversible bonding of the parts. The low viscosity of the cold glue it also allows the use in applications where it is necessary to deposit of adhesive points of particularly small size or high speed, it being understood that the bonding will be permanent only after the evaporation of the aqueous part of the glue.

What should I do if I wish to make a cold glue system for an extended time?

The cold glue, in contact with the air, it loses the water contained therein and congeals. And ‘good practice to provide the washing of the entire system (adhesive tank, pump, hoses and guns) with lukewarm water in anticipation of prolonged stops (the time is dependent on the type of adhesive used and its viscosity).

Because in some applications it is used a double bonding hot glue + cold glue?

The 2 types of bonding are complementary, in fact the hot-melt adhesive has a short setting time but the bonding may yield when subjected to medium / high temperatures, while the cold glue, while using medium / long setting times, has an irreversible bonding.
In this way the hot glue will ensure bonding the short term even in fast applications, waiting for the cold glue to provide the definitive and irreversible.

Related products



Submit a request: