MESSIER MC42 APP

Messier MC 42 App guarantees the remote control of Messier MC 42 sprayer easily and without problems.
It allows you to reset the system, modify the quantity of liquid sprayed and modify the photocells for the passage of the panels.

It also allows you to program every parameter of the system for cleaning wood borders and make dynamic test for every part it is made of.

The connection occurs via Bluetooth.

In particular:

• System reset/Alarm reset: makes the board restart or reset the alarms.
• Guns and photocell test: This function checks the operation of the guns, allowing precise regulation of the sprayed liquid quantity. It’s also possible to control the operation of the photocells that check the presence of the panels.
• Set the number of panels that don’t have to be sprayed: It allows you to set how often the spray function must be activated. This function is usually used to nebulize the liquid on the edge pressing roller, where the distribution for every passing panels would be excessive.
• Enable/Disable sensors: This function, which is possible only in systems that have the supply verification option, allows the control of enabling or disabling the supply function in one or more guns.
• Tollerance of distribution: this function, which is only available in systems that have the supply verification option, allows to set the variation of the quantity of the liquid supplied needed to activate the alarm.