MC-PRG1 - Programmer for sections of adhesive in modular version

Drivers


General features

MC-PRG1 - MC-PRG1

System for the adjustment and the positioning of the adhesive traits suitable for all applications in the field of packaging and assembly (closing boxes, labeling, etc.).
Thanks to the precision and speed of response is especially suitable to be used in fast forward or lines in particularly critical applications, both on constant speed lines, both of those at variable speed.

The programming of the operating parameters should be done by PRG1-COM programming PC and software or by means of the programming terminal MC-TRM06 in 2 versions T (for constant speed lines with a duration of the strokes and pauses expressed in msec) or ( for constant or variable speed lines with a duration of the strokes and pauses expressed in mm).

The MC-PRG1 programmer is characterized by the possibility to increase the number of controllable channels simply by adding one or more of PRG1-EXP expansion modules capable, each one, to manage 2 channels in a completely independent manner.

The innovative aspects of the MC-PRG1 programmer are numerous:

  • The high amount of glue lines / manageable breaks (8 stretches and breaks 8)
  • The high number of sizes (16 to which it is possible to match a name of 8 characters each which allows a quicker identification)
  • Modularity that allows you to decide the number of channels (guns or other actuators) from a minimum of 2 to a maximum of 8 by the addition of a PRG1-EXP expansion module
  • Ability to use an independent startup splash sensor for each gun
  • Ability to operate both in timer mode (sections of adhesive / pauses managed in milliseconds, typical constant speed lines) or in encoder mode (sections of adhesive / pauses managed in millimeters for fixed or variable speed lines).
  • The high versatility for the use of sensors (both are usable PNP type sensors both of the NPN type)
  • A complete diagnostic indication of the state of the system (off, on, error etc.) And an easy identification of the anomaly present through an error code is displayed directly on the display of the MC-TRM06 terminal or PC equipped with software PRG1-COM
  • A complete test procedure that allows to control the operation of the guns and the splash control sensors in a static way, (with line stops)
  • Possibility of use of a code (password) from 1 to 5 digits for the block of the programming of operating parameters and formats
  • Interfacing to other systems: by means 3 outputs it is possible to manage the alarm conditions and on / off system.

Technical details

FIXTURE DIN guide
CONNECTIONS Screw-on terminals for cable Ø max.1,5mm
DIMENSIONS of the MC-PRG1 unit (lenght x width x height) 126 x 77 x 65 mm
DIMENSIONS of the expansion module for 2 channels PRG1-EXP (lenght x width x height) 68 x 77x 48 mm
DIMENSIONS of the module for proportional valve PRG1 0/10V (lenght x width x height) 58 x 77 x 48 mm
DIMENSIONS of the timer module PRG1-CLOCK (lenght x width x height) 48 x 77 x 48 mm
POWER SUPPLY 22-28 Vcc 100mA max.
OPERATING MODES Timer or millimetre counter (with encoder)
LENGHT OF EACH SECTION / PAUSE 0-9999 msec (timer mode) 0-9999 mm (encoder mode)
SYSTEM PRECISION ± 1 (mm or msec.)
MAX LINE SPEED (IN ENCODER MODE) >500 meters/min *
NUMBER OF SECTION MANAGED 8 sections of adhesive + 8 pauses
NUMBER OF SIZE AVAILABE 16 combined with just as many messages of 8 digits each
SERIAL COMMUNICATION PORT RS485 / RS 232 for connection to the programming terminal or to a PC
MAX CURRENT ON EACH ELECTROVALVE PILOT OUTPUT 1,5A (@ 25°C)
TYPE OF ELECTROVALVE PILOT OUTPUT Static relay (SSR) with PNP logic
TYPE OF PHOTOCELL INPUTS Opto-insulated with NPN or PNP logic
TYPE OF ENCODER OUTPUTS Opto-insulated with NPN or PNP logic
CORRENTE MAX. SU OGNI USCITA DI PILOTAGGIO SPIE DI SEGNALAZIONE 100mA (@ 25°C)
TYPE OF STATUS OUTPUTS NPN logic

* The maximum speed of the line depends on the frequency of the encoder (max. 12KHz).

F.A.Q.

Related products



Submit a request: